Users Manual

ALL
EFFECTIVITY
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Page 5-12
22 Apr 2019
23-15-49
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ASPIRE-400
1 This option provides an external AIS client interface when one or more
dynamic PDP contexts are specified and PPPoE is the means of
accessing the SATCOM network. The contexts are initiated by the ACD
in response to user requests collected from the AISD.
2 The following control functions are provided:
a PPPoE with AC Service names - to set up primary contexts
b Out of band control via AT command - to set up secondary or
modify primary contexts
c SNMP - to communicate operational and link status.
3 When notified by the ACD that a requested context is available, the
AISD:
a Supports the ORT defined PDP contexts
b Connects the requesting IP or PPPoE session to the associated
Tunneled PPP Transport over Ethernet (TPToE).
(2) The AISD provides the user interface with the gateway IP address based on the ORT as
follows:
(a) Using the fixed host IP address and subnet mask provided by the ORT;
AND
(b) When AISD is ORT-configured as a DHCP server it also does the following:
1 Assigns user IP address derived from the base address and range
provided by the ORT;
2 Employs a NAT service to forward user traffic over the air.
B. Satellite Handover
(1) The AISD retains active contexts during handover and handles orderly termination of any
pending or established data sessions in the event of a handover failure.
(2) If a new data session is initiated during handover, the AISD accepts the data session, but
postpones the data session initiation until:
(a) Safety Logon is achieved at the 1st satellite link Network Logon attempt, the
AISD initiates the data session.
(b) Safety Logon is failed at the 1st satellite link Network Logon attempt, the AISD
rejects the data session.
(c) The user terminates the data session, the AISD terminates the data session.
C. Auto Background
(1) When configured to Auto Background based on the ACD ORT, the AISD:
(a) Responds to an ACD context query by requesting a background context;
(b) Supports username and password transmission to the ground via the AISD
default service string;
(c) Does not initiate PPPoE service handling;
DRAFT
3rd rvw Draft as of:
29 January, 2020