Users Manual

ALL

EFFECTIVITY

Page INTRO-4

22 Apr 2019

23-15-49

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL

ASPIRE-400

– IEEE Std 260.1, Standard Letter Symbols for Units of Measurement (available

from the American National Standards Institute at http://www.ansi.org)

– ASME Y14.38, Abbreviations for Use on Drawings and Related Documents

(available from the American National Standards Institute at http://www.ansi.

org)

– ASME Y14.5, Dimensioning and Tolerancing (available from the American

National Standards Institute at http://www.ansi.org)

– ANSI/IEEE Std 91, Graphic Symbols for Logic Functions (available from the

American National Standards Institute at http://www.ansi.org)

– CAGE codes and manufacturers’ addresses are available at https://cage.dla.

mil

– IEEE 315/ANSI Y32.2, Graphic Symbols for Electrical and Electronics

Diagrams (available from the American National Standards InstituteInstitute at

http://www.ansi.org)

3. Acronyms and Abbreviations (TASK 23-15-49)

A. General

(1) The abbreviations are used in agreement with ASME Y14.38.

(2) Acronyms and non-standard abbreviations used in this publication are as follows:

Table INTRO-2. List of Acronyms and Abbreviations

Term Full Term

AAC Aeronautical Administrative Communication

AC Air Circular

ACARS Aircraft Communications Addressing and Reporting System

ACD Aircraft Control Domain

ACMM

abbreviated component maintenance manual

ACO Aircraft Certification Office

ADC Analog to Digital Converter

ADGW Aircraft Datalink GateWay

AEH Airborne Electronic HW

AES Aeronautical Earth Station

AG Aerospace Guidance

AIS Aircraft Information System

AISD Aircraft Information Systems Domain

AMBE Advanced Multiband Excitation

AMD Advanced Micro Devices

DRAFT

3rd rvw Draft as of:

29 January, 2020