Installation Guide

Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
® U.S. Registered Trademark
© 2013 Honeywell International Inc.
69-2122—05 L.L. Rev. 10-13
Printed in United States
AUXILIARY I/O
AUX.IN
(optional)
SETBACK / VACANCY /
EM. SHUT / NONE
SETBACK
AUX.OUT
(optional)
BOILER / SETBACK /
ZONE OP. / ALARM /
AUX.IN / DHW IN / HEAT IN /
HT DMND / COOL / NONE
BOILER
AUX.PUMP
(optional)
BOILER / GROUP / OCC /
BYPASS / FAN / NONE /
AUX.IN / DHW IN / HEAT IN /
HT DMND
BOILER
A/C SETTINGS
CYCLES/HOUR 2 / 3 / 4 / 5 / 6 4
MIN.OFF TIME 2 to 10 (minutes) 5M
C.W.S.D. - -
32°F to 100°F (0°C to 38°C)
65°F
(18°C)
FAN MODE AUTO / ON AUTO
A/C EQUIP CONFIG
ZONE A-1 to D-16 A-1
A/C UNIT NONE / 1 1
COOLING ENABLE / DISABLE ENABLE
ENVIRACOM (not used at this time - reserved for future use)
Modules ID: n/a n/a
Table 1. Installer Menu – Equipment Setup Sub-menu. (Continued)
EQUIPMENT SETUP SUB-MENU
Sub-Menu and Option Range Factory Default Equipment Settings Used