User Manual
4
Unit does not power up.
Make sure that shredder head is properly placed on the waste
basket. The shredder handle and the basket window should be
facing the front. This unit has an automatic sensor, which switches
the shredder off when the shredder head is removed from the
wastebasket. In addition make sure that the auto feed panel is
properly closed (see steps 79 in “Clearing Auto Feed Paper Jams”)
Paper is jammed and shredder does not run.
Too many sheets of paper are being fed into shredder at one time.
Press the “REV” button to clear.
Warning
Operation, maintenance, and service requirements are covered in
the instruction manual. Read the entire instruction manual before
operating shredders.
Avoid hair touching the document feed opening.
Avoid touching the document feed opening with hands.
Avoid clothing touching the document feed opening.
Avoid shredding staples and clips.
Product is not intended for use by children (product is not a toy).
Keep aerosol products away.
Shredder motor is making loud and/or irregular noises during
operation
Your motor or gears could be damaged. Please immediately stop
use, unplug the machine and call customer support for assistance.
Power turned off while shredding.
This unit is equipped with a motor overheat protection circuit,
which may terminate power automatically if your shredder’s
motor overheats. If this happens the shredder’s overheat LED will
illuminate. To reset the motor overheat circuit, turn the unit off
and wait about 3060 minutes for the motor to cool down before
attempting to shred again.
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
MARKING AND INSTRUCTIONS
TROUBLESHOOTING TIPS