ENGLISH User Guide M9660DS 60 Sheet Auto Feed Micro Cut Paper Shredder Model 9660DS Package Includes; 1 - Shredder Head 1 - Plastic Waste Bin 1 - User Guide 1 Shredder Head 1 Plastic Waste Bin 1 User Guide Please carefully check the above list to confirm all items have been received. If any items are missing, please contact Consumer Assistance. (See page 6 for contact information). Read and save this user guide for future reference.
DO NOT RETURN SHREDDER TO STORE If you are missing parts or have difficulty operating your paper shredder, please contact our Consumer Assistance Department by telephone. Store will not accept returned products without prior authorization. You must first contact our Consumer Assistance Department (See page 6 for contact information). INDEX PRODUCT OVERVIEW........................................................................... PAGE 1 3 FUNCTION CONTROLS...................................................
PRODUCT OVERVIEW E F G A A - Cover Lid B - Access Knob C - 3 Function Control Switch B D - Waste Basket E - Manual Feed Slot C F - Auto Feed Slot D G - Handle 3 FUNCTION CONTROL SWITCH AUTO OFF FWD - Activates shredder and begins shredding REV AUTO - Turns on standby mode, shredding starts when paper sheets are inserted into the feed opening. REV - Shredder will rotate in opposite direction, forcing paper to exit at top.
IMPORTANT SAFETY GUIDELINES • Do not exceed maximum recommended number of sheets when feeding paper into shredder. • Do not put paper clips or staples into shredder to avoid damaging the blades. • Always unplug the shredder before cleaning the waste bin. • Unplug the shredder if not in use for extended periods of time. • Keep ties, jewelry, hair, etc. away from the shredder feed opening to insure personal safety. • Avoid touching the feed opening with hands.
EMPTY WASTE BIN 1. Unplug the shredder power cord from the electrical outlet. 2. Remove the shredder head from the waste bin by lifting the handle straight up. 3. Empty the waste bin. 4. Replace shredder head on waste bin. 5. Plug shredder power cord back into outlet. CLEARING PAPER JAMS Clearing Manual Feed Paper Jams: To clear a paper jam from the manual feed opening, simply switch the function button to the reverse position (REV) and manually pull out the paper in the feed opening to clear the jam.
TROUBLESHOOTING TIPS PROBLEM: Unit does not power up. SOLUTION: Make sure that shredder head is properly placed on the waste basket. The shredder handle and the basket window should be facing the front. This unit has an automatic sensor, which switches the shredder off when the shredder head is removed from the wastebasket. In addition make sure that the auto feed panel is properly closed (see steps 7-9 in “Clearing Auto Feed Paper Jams”) PROBLEM: Power turned off while shredding.
LIMITED WARRANTY LH Licensed Products, Inc., (“LHLP, Inc.”) warrants that for a period of one (1) year(cutter) / three (3) years (parts except cutter) from the date of purchase, this product will be free from structural or mechanical defects resulting from materials or workmanship. LHLP, Inc., at its sole option and as the purchaser’s sole remedy under this warranty, will repair or replace this product or any component of the product found to be defective during the warranty period.
CONSUMER ASSISTANCE EMAIL: LHLPCustomerService@LHLPinc.com WEBSITE: www.honeywellsafes.com ADDRESS: Consumer Assistance Dept. LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 USA TELEPHONE: US/Canada 1-877-354-5457 (Toll Free) Mexico 01-800-288-2872 After English voice recording stops you must then enter 800-860-1677 to complete your call.
