Installation Guide

8
13. INSTALLING BATTERIES
a. Slide battery cover up and remove.
b. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the
 
the Honeywell button will flash green twice to signify that it has received power (Figure 13a).
 
batteries (Figure 13b).
14. TESTING LOCK
a. Always test with the Door Open
 
 
to unlock.
Battery
Cover
4 AA
Batteries
NOTE: Do not touch the Keypad until the blue light turns off.
Do not use rechargeable batteries or non-alkaline batteries.
Figure 13a-b
INSTALLATION OVERVIEW
Strike Plate
3/4”(19mm) screws(C)
Mounting Plate


Optional
3/4”(19mm) screw(C)
Interior Assembly
Battery Cover
5/16”(8mm) screw(A)
1”(25mm) screw(D)

Latch
Control Wire

Exterior Assembly
Key
INSTALLING INTERIOR ASSEMBLY