Quick Start Guide
Table Of Contents
- 8690i-EN-QS-01 Rev A
- 8690i
- RFID Mini Wearable Mobile Computer
- Quick Start Guide
- Out of the Box
- Device Features
- Charging the Battery
- Install the Battery
- Replace the Battery
- Right or Left Handed Operation
- Attach the Device to Your Fingers
- Power Up the Device
- User Window
- Wrist Position When Scanning
- How to Scan a Bar Code
- Connect the Device via Bluetooth®
- Pair with an Android™ Mobile Device
- Pair with an Android, Apple™ or Windows® Mobile Device
- Pair with a Honeywell Vehicle Mount Computer
- Reset Custom Defaults
- Support
- User Documentation
- Limited Warranty
- Patents
- Disclaimer
- DRAFT 8690i-ML-RS-01 Rev (a) Prelim-01--release for ECN
5
Replace the Battery
Note: The battery should be replaced in an environment free
from excessive dust or particulate to avoid an internal
buildup of dust in the unit.
When the battery is low, the 8690i beeps and vibrates and the
window shows a Battery Low warning. You can also press both
the right and left buttons at any time to view the battery’s charge
status. To replace the battery, squeeze the battery latch and lift
up on the battery.
Replace the battery by aligning with the side of device and
snapping it in to the device.