Quick Start Guide
Table Of Contents
- 8690i-EN-QS-01 Rev A
- 8690i
- RFID Mini Wearable Mobile Computer
- Quick Start Guide
- Out of the Box
- Device Features
- Charging the Battery
- Install the Battery
- Replace the Battery
- Right or Left Handed Operation
- Attach the Device to Your Fingers
- Power Up the Device
- User Window
- Wrist Position When Scanning
- How to Scan a Bar Code
- Connect the Device via Bluetooth®
- Pair with an Android™ Mobile Device
- Pair with an Android, Apple™ or Windows® Mobile Device
- Pair with a Honeywell Vehicle Mount Computer
- Reset Custom Defaults
- Support
- User Documentation
- Limited Warranty
- Patents
- Disclaimer
- DRAFT 8690i-ML-RS-01 Rev (a) Prelim-01--release for ECN
16
Reset Custom Defaults
If you want the custom default settings restored to your 8690i,
scan the Activate Custom Defaults bar code below. This is the
recommended default bar code for most users. It resets the
8690i to the custom default settings. If there are no custom
defaults, it resets the 8690i to the factory default settings. Any
settings that have not been specified through the custom
defaults are defaulted to the factory default settings.
Note: Scanning the Defaults bar code also causes both the 8690i
and the host to perform a reset and become unlinked. You
must relink (pair) the 8690i to the host.
Activate Custom Defaults