Quick Start Guide
Table Of Contents
- 8690i-EN-QS-01 Rev A
- 8690i
- RFID Mini Wearable Mobile Computer
- Quick Start Guide
- Out of the Box
- Device Features
- Charging the Battery
- Install the Battery
- Replace the Battery
- Right or Left Handed Operation
- Attach the Device to Your Fingers
- Power Up the Device
- User Window
- Wrist Position When Scanning
- How to Scan a Bar Code
- Connect the Device via Bluetooth®
- Pair with an Android™ Mobile Device
- Pair with an Android, Apple™ or Windows® Mobile Device
- Pair with a Honeywell Vehicle Mount Computer
- Reset Custom Defaults
- Support
- User Documentation
- Limited Warranty
- Patents
- Disclaimer
- DRAFT 8690i-ML-RS-01 Rev (a) Prelim-01--release for ECN
12
Pair with a PC or Laptop Bluetooth: HID Keyboard Mode
In this mode, the 8690i pairs with a Bluetooth device using a
HID keyboard.
1. Scan the Bluetooth HID Keyboard Connect bar code
below.
2. Set your host device so it searches for other Bluetooth
devices. (Refer to your host device’s User’s Guide for pairing
instructions.)
3. When your host device has located the 8690i, you can select
it from the list displayed.
Note: Refer to the 8690i User’s Guide if your host device displays
a PIN.
The Bluetooth symbol appears in the device window when the
device pairs with a host.
Bluetooth HID Keyboard Connect