Quick Start Guide
Table Of Contents
- 8690i-EN-QS-01 Rev A
- 8690i
- RFID Mini Wearable Mobile Computer
- Quick Start Guide
- Out of the Box
- Device Features
- Charging the Battery
- Install the Battery
- Replace the Battery
- Right or Left Handed Operation
- Attach the Device to Your Fingers
- Power Up the Device
- User Window
- Wrist Position When Scanning
- How to Scan a Bar Code
- Connect the Device via Bluetooth®
- Pair with an Android™ Mobile Device
- Pair with an Android, Apple™ or Windows® Mobile Device
- Pair with a Honeywell Vehicle Mount Computer
- Reset Custom Defaults
- Support
- User Documentation
- Limited Warranty
- Patents
- Disclaimer
- DRAFT 8690i-ML-RS-01 Rev (a) Prelim-01--release for ECN
11
Connect the Device via Bluetooth®
Pair with a PC or Laptop Bluetooth Serial Port: Host
Reconnect Mode
The 8690i can pair with host Bluetooth devices such as personal
computers, laptops, and tablets. In this mode, the host will
continually attempt to connect with the device. If the device and
the host become disconnected, the host will manage the recon-
nection.
1. Scan the Host Reconnect Mode bar code, below.
2. Set your host device so it searches for other Bluetooth
devices. (Refer to your host device’s User’s Guide for pairing
instructions.)
3. When your host device has located the 8690i, you can select
it from the list displayed.
Note: Refer to the 8690i User’s Guide if your host device displays
a PIN.
The Bluetooth symbol appears in the device window when the
device pairs with a host.
Host Reconnect Mode