8690i RFID Mini Wearable Mobile Computer Quick Start Guide 8690i-EN-QS-01 Rev A 11/20
Out of the Box Make sure that your shipping box contains these items: • Honeywell 8690i Mini Wearable Mobile Computer • Rechargeable battery • Product Documentation If you ordered accessories for your device, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the device for service.
Device Features Scanner Battery Battery release buttons Right button Left button Scan Scanner button Trigger User window Finger Strap Wearable accessory release buttons 2
Charging the Battery The 8690i mini wearable mobile computer ships with a partially charged battery. The battery must be fully charged before first use. The following charging stations are available for the device and must be purchased separately: • MB4-BAT-SCN07 • MB4-SCN07 • MB4A-SCN07 • MB12-BAT-SCN07 • MB12-SCN07 • MB12A-SCN07 We recommend the use of Honeywell accessories and power adapters. Use of non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
Install the Battery The device ships with a 3.7V, 3400 mAh battery manufactured by Honeywell International Inc. Use only Honeywell battery model BAT-SCN07.
Replace the Battery Note: The battery should be replaced in an environment free from excessive dust or particulate to avoid an internal buildup of dust in the unit. When the battery is low, the 8690i beeps and vibrates and the window shows a Battery Low warning. You can also press both the right and left buttons at any time to view the battery’s charge status. To replace the battery, squeeze the battery latch and lift up on the battery.
Right or Left Handed Operation To release the finger trigger, turn over the device. Press the two release buttons on either side of the trigger. Rotate the trigger and snap it into place to change the operation to the correct hand.
Attach the Device to Your Fingers 7
Pull the free end through the loop the press the excess down to secure the strap.
Power Up the Device Press the trigger to power up the device. The battery, WiFi, and Bluetooth status appear in the window. User Window 95% The user window displays prompts for using the device in your environment. The buttons to the left and right of the window are used to scroll through the windows or to enter responses to screen prompts. • Press both the right and left buttons at the same time to view the WiFi, Bluetooth, and battery status.
Wrist Position When Scanning ! Warning: Do not stare directly into the laser beam. How to Scan a Bar Code The 8690i scanner has a view finder that projects a bright aiming pattern. This aiming pattern should be centered over the bar code, but it can be positioned in any direction for a good read.
Connect the Device via Bluetooth® Pair with a PC or Laptop Bluetooth Serial Port: Host Reconnect Mode The 8690i can pair with host Bluetooth devices such as personal computers, laptops, and tablets. In this mode, the host will continually attempt to connect with the device. If the device and the host become disconnected, the host will manage the reconnection. 1. Scan the Host Reconnect Mode bar code, below. Host Reconnect Mode 2. Set your host device so it searches for other Bluetooth devices.
Pair with a PC or Laptop Bluetooth: HID Keyboard Mode In this mode, the 8690i pairs with a Bluetooth device using a HID keyboard. 1. Scan the Bluetooth HID Keyboard Connect bar code below. Bluetooth HID Keyboard Connect 2. Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3. When your host device has located the 8690i, you can select it from the list displayed.
Disconnect from the Host Once your device has been connected to a host, you must disconnect it in order to communicate with a different device. Scan the Bluetooth Disconnect bar code to unlink the device from the currently linked host. Bluetooth Disconnect Pair with an Android™ Mobile Device Tap and Pair You can pair your Android™ phone with the 8690i by touching the devices together. 1. Make sure the NFC setting is On in your phone. 2. Touch the Android phone to the device. 3.
Pair with an Android, Apple™ or Windows® Mobile Device The 8690i can pair with Android, Apple, and Windows mobile devices, excluding Windows CE and Mobile. 1. Set your mobile device so it searches for other Bluetooth devices. (Refer to your mobile device’s User’s Guide for pairing instructions.) 2. Scan the Bluetooth HID Keyboard Connect bar code below. Bluetooth HID Keyboard Connect 3. On the mobile device, the 8690i device is shown as a keyboard. Click on it to pair.
Pair with a Honeywell Vehicle Mount Computer The 8690i can pair with Honeywell vehicle mount computers, such as the Thor VM1 or VM2, or with Tecton mobile computers. 1. Scan the Bluetooth HID Keyboard Disconnect bar code below. Bluetooth HID Keyboard Disconnect 2. Use the 8690i to scan the EZPairing bar code that is either supplied with the device, attached to the device, or displayed on the screen. The EZPairing bar code begins with {FNC3}LnkB, followed by 10 digits, like the sample below.
Reset Custom Defaults If you want the custom default settings restored to your 8690i, scan the Activate Custom Defaults bar code below. This is the recommended default bar code for most users. It resets the 8690i to the custom default settings. If there are no custom defaults, it resets the 8690i to the factory default settings. Any settings that have not been specified through the custom defaults are defaulted to the factory default settings.
Support To search our knowledge base for a solution or to log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com. User Documentation For the user guide and other documentation, go to www.honeywellaidc.com. Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc.
this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright2020 Honeywell International Inc. All rights reserved.
8690i-ML-RS-01 Rev (a) Preliminary Draft 10/23/20 Agency Model: 8690i Product documentation is available at www.honeywellaidc.com. La documentation sur le produit est disponible à www.honeywellaidc.com. La documentation du produit est disponible sur le site www.honeywellaidc.com. La documentazione sul prodotto è disponibile sul sito www.honeywellaidc.com. Die Produktdokumentation ist unter www.honeywellaidc.com verfügbar. La documentación del producto está disponible en www.honeywellaidc.com.
Preliminary Draft 10/23/20 Patents Brevets Brevets Brevetti Patente Patentes Patentes Patentes For patent information, refer to www.hsmpats.com. Veuillez consulter le site www.hsmpats.com pour obtenir des renseignements au sujet du brevet. Pour plus d’informations sur les brevets, visitez la page www.hsmpats.com. Per i dettagli sui brevetti, fare riferimento al sito Web www.hsmpats.com. Patentinformationen sind unter www.hsmpats.com erhältlich.
