Spec Sheet

©Generac Power Systems, Inc. All rights reserved.
Specifications subject to change without notice.
The Honeywell trademark is used under license from Honeywell
International Inc.
Honeywell International Inc. makes no representation or warranties
with respect to this product. This product is manufactured by
Generac Power Systems, Inc., Waukesha, WI. 53189, USA.
A0000032409 | Rev A | 08/19.
Generac Power Systems, Inc.
S45 W29290 Hwy 59
Waukesha, WI. 53187
1.855.GEN.INFO
www.honeywellgenerators.com
10/13/16 kW Standby Generator Available Accessories
MODEL PRODUCT DESCRIPTION
G005819-0
26R Wet Cell Battery Every standby generator requires a battery to start the system. The recommended 26R
wet cell battery is for use with all air-cooled standby product..
G007101-0
Battery Pad Warmer The pad warmer rests under the battery. Recommended for use if the temperature
regularly falls below 0 °F (18 °C). (Not necessary for use with AGM-style batteries.)
G007102-0
Oil Warmer The oil warmer slips directly over the oil filter. Recommended for use if the temperature
regularly falls below 0 °F (18 °C).
G007103-1
Breather Warmer The breather warmer is for use in extreme cold weather applications. For use with
Sync™ controllers only in climates where heavy icing occurs.
G005621-0
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single
large electrical load the user may not need.
G006160-0
TouchUp Paint Kit If the generator enclosure is scratched or damaged, it is important to touch-up the
paint to protect from future corrosion. The paint kit includes the necessary paint to
correctly maintain or touch-up a generator enclosure.
G006482-0 – 10 KW
G007216-0 – 13/16 KW
Scheduled Maintenance Kit Scheduled maintenance kits provide all the items necessary to perform complete
routine maintenance on a Honeywell automatic standby generator (oil not included).
G007005-0
WiFi™ LP Fuel Level Monitor The WiFi enabled LP fuel level monitor provides constant monitoring of the
connected LP fuel tank. Monitoring the LP tank fuel level is an important step in
verifying the generator is ready to run during an unexpected power failure. Status
alerts are available through a free application to notify the user when the LP fuel tank
is in need of a refill.
G007001-0 – 50 AMP
G007006-0 – 100 AMP
Smart Management Module Smart Management Modules (SMM) are used to optimize performance of a standby
generator. It manages large electrical loads upon startup and sheds them to aid in
recovery when overloaded. In many cases, using SMM's can reduce the overall size and
cost of the system..
G007169-0
Mobile Link™ Cellular 4G LTE
Accessory
Mobile Link 4G LTE Cellular Accessory allows the user to monitor the status of the
generator from anywhere in the world, using a smartphone, tablet, or PC. Easily access
information such as the current operating status and maintenance alerts. Users can
connect an account with an authorized service dealer for fast, friendly, and proactive
service. With Mobile Link, the user is taken care of before the next power outage.
Dimensions and UPCs
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in
]
1218 mm
[48.0 in]
LEFT SIDE VIEW
FRONT VIEW
MODEL UPC
G007179-0
696471077209
G007180-0
696471077216
G007181-0
696471077223