Spec Sheet

Generac Power Systems, Inc.
S45 W29290 Hwy. 59
Waukesha, WI 53187
Tel: 1-855-GEN-INFO
honeywellgenerators.com
10000000220-B
May 2016
© Generac Power Systems, Inc. All rights reserved.
Specifications subject to change without notice.
The Honeywell Trademark is used under
license from Honeywell International Inc.
Honeywell International Inc. makes no representation
or warranties with respect to this product.
This product is manufactured by Generac Power Systems, Inc.
Model # Product Description
G005819-0
26R Wet Cell
Battery
Every standby generator requires a battery to start the system. The recommended 26R
wet cell battery is for use with all air-cooled standby product.
G007101-0 Battery Pad Warmer
The pad warmer rests under the battery and will warm the battery. Recommended for
use if the temperature regularly falls below 0°F. (Not necessary for use with AGM-style
batteries.)
G007102-0 Oil Warmer
Oil warmer slips directly over the oil filter. Recommended for use if the temperature
regularly falls below 0°F.
G007103-0 Breather Warmer
The breather warmer is for use in extreme cold weather applications. For use with Sync
2.0 controllers only in climates where heavy icing occurs.
G005621-0
Auxillary Transfer
Switch Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large
electrical load you may not need.
G006160-0 Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-up the paint
to protect from future corrosion. The paint kit includes the necessary paint to properly
maintain or touch-up a generator enclosure.
G006485-0
Scheduled
Maintenance Kit
Scheduled maintenance kits provide all the hardware necessary to perform complete
routine maintenance on a Honeywell automatic standby generator.
G006874-0
Smart Management
Module (50 Amps)
Manage large loads by utilizing up to 8 individual Smart Management modules. These
devices are installed directly in line with existing appliance wiring for easy installation.
G006463-3 Mobile Link™
Mobile Link allows you to check the status of your generator from anywhere that you
have access to an Internet connection from a PC or with any smart device. You will even
be notified via e-mail or text message when a change in the generator’s status occurs.
Available in the U.S. only.
AVAILABLE ACCESSORIES
DIMENSIONS & UPCs
Model UPC
G007059-0 696471070590
G007062-0 696471070620
G007065-0 696471070651
G007064-0 696471070644
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in ]
1218 mm
[48.0 in]
LEFT SIDE VIEW
FRONT VIEW