Install Manual

Control Panel Start-Up/Testing
32 Installation Guidelines for 60 Hz Air-Cooled Generators
Table 7-1. Activation Chart
Display Reads Troubleshooting
Use arrow keys to
scroll to desired
language.
Press ENTER to
select.
Language can be changed later using
the EDIT menu.
Use arrow keys to
either enable or
disable Wi-Fi (if
equipped).
If YES, refer to the
Wi-Fi manual.
If NO, continue.
Press ENTER to begin
the activation process.
If ESCAPE is pressed instead of
ENTER, the generator will only run in
manual mode (for test purposes) and
NOT ACTIVATED will be displayed. To
prepare the controller for step 1,
remove the 7.5 amp generator control
panel fuse AND disconnect the T1, N1,
and N2 connector in the external
connection box (if equipped); or
disconnect utility input (main breaker)
to the transfer switch for 3–5 seconds
and reconnect.
If you do not have your
activation code, go to
www.activategen.com
or call 1-888-
9ACTIVATE
(922-8482 US & CA
only).
If you already have
your activation code,
wait 3–5 seconds for
the next display.
Language
- English +
002227
Enable Wi-Fi?
- Yes +
004498
Activate me (ENT) or
ESC to run in manual
002228
To Activate go to
www.activategen.com
002229