Install Manual

Unpacking and Inspection
Installation Guidelines for 60 Hz Air-Cooled Generators 7
Section 2: Unpacking and Inspection
General
NOTE: Carefully inspect the contents for damage after
unpacking. Unpack and inspect the unit immediately
upon delivery to identify any damage which may have
occurred in transit. Any claims for shipping damage need
to be filed as soon as possible with the freight carrier.
This is especially important if the generator will not be
installed for a period of time.
• This standby generator set is ready for installation
with a factory supplied and pre-mounted base pad
and has a weather protective enclosure intended
for outdoor installation only.
• If any loss or damage is noted at time of delivery,
have the delivery person(s) note all damage on the
freight bill, or affix their signature under the
consignor’s memo of loss or damage.
• If a loss or damage is noted after delivery, separate
the damaged materials and contact the carrier for
claim procedures.
• “Concealed damage” is understood to mean
damage to the contents of a package not evident at
the time of delivery, but discovered later.
Required Tools
• General SAE and Metric hand tools
– Wrenches
– Sockets
– Screwdrivers
• Standard electrician’s hand tools
– Drill and bits for mounting and routing conduits
• 4 mm hex key (for access to customer
connections)
• 3/16 in hex key (test port on fuel regulator)
• Manometer (for fuel pressure checks)
• Meter capable of measuring AC/DC voltage and
frequency
• Torque wrenches
• Non-corrosive gas leak detection fluid
Unpacking
1. Remove outer shipping carton.
2. See Figure 2-1. Remove the wood frame.
Figure 2-1. Crated Generator
3. See Figure 2-2. The lid will be locked. A set of
keys is attached to the cardboard sheet on top of
the generator set. An additional set is attached to
the pallet bracket on the front intake end of the
generator set.
Figure 2-2. Keys As Shipped
4. Remove the keys from the cardboard and pallet
bracket.
5. Use the keys to open the generator lid.
NOTE: The enclosed keys provided with this unit are
intended for service personnel only.
000427
006729