15kw Home Standby Generator Spec Sheet
Generac Power Systems, Inc.
S45 W29290 Hwy. 59
Waukesha, WI 53187
Tel: 1-855-GEN-INFO
honeywellgenerators.com
0198040SBY-D
April 2013
© Generac Power Systems, Inc. All rights reserved.
Specifications subject to change without notice.
The Honeywell Trademark is used under
license from Honeywell International Inc.
Honeywell International Inc. makes no representation
or warranties with respect to this product.
731.9 mm
[28.8 in.]
637.6 mm
[25.1 in.]
LEFT SIDE VIEW
642 mm
[25.3 in.]
76.2 mm [3.0 in.]
PEA GRAVEL
MINIMUM
TRANSFER
SWITCH
8KW - 17KW
(IF SUPPLIED)
TRANSFER
SWITCH
20KW
(IF SUPPLIED)
1218 mm
[47.9 in.]
FRONT VIEW
1226 mm
[48.3 in.]
H2
H1
W1
W2
H2
H1
W1
W2
Model # Product Description
5819 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Honeywell offers the
recommended 26R wet cell battery for use with all air-cooled standby product.
6212 Cold Weather Kit
If the temperature regularly falls below 32°F (0°C), install a cold weather kit to maintain
optimal battery and oil temperatures. Kit consists of a battery warmer and oil filter heater
with built-in thermostats.
5621
Auxillary Transfer
Switch Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large
electrical load you may not need.
6160 Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to
protect from future corrosion. The paint kit includes the necessary paint to properly maintain
or touch-up a generator enclosure.
6483 (11kW)
6484 (15kW)
6485 (20kW)
Scheduled Mainte-
nance Kit
Honeywell's scheduled maintenance kits provide all the hardware necessary to perform
complete routine maintenance on a Honeywell automatic standby generator.
6200 PMM Starter Kit
The PMM Starter Kit consists of a 24VAC, field installed transformer that enables the use
of the 24VAC Power Management Modules (PMMs) and one PMM. The standard controller
(without starter kit) can control two HVAC loads with no additional hardware.
6187
Power Management
Module
(50 Amps)
Power Management Modules are used in conjunction with the Sync Smart Switch to in-
crease its power management capabilities. It gives the Sync Smart Switch additional power
management flexibility not found in any other transfer switch.
AVAILABLE ACCESSORIES
DIMENSIONS