Safe Manual
3
IMPORTANT - For added security, it is recommended to immediately program a new personal
combination to replace the factory set combination. Open the Key Cabinet by turning the dials to the
factory set combination “0-0-0”. The 3 digits need to be straight across, reading left to right, as shown
below in g 2. Then lay the Key Cabinet at and follow steps below to change the factory combination
to your own personal combination.
CHANGING THE COMBINATION:
1. Locate the back of the lock on the inside of the Key Cabinet and move the lever from position B to
position A (Figure 1).
2. With the lever in the A position you may now reset the dial combination to three numbers of your
choosing (Figure 2).
3. Return the Program Lever to position “B” to complete the programming function (Figure 3).
4. With the Key Cabinet still open, turn the numbers to a combination dierent from the new
combination you have set (Figure 4).
5. The Key Cabinet should now be locked and can be re-opened by returning the dials to the new
combination you had just set.
6. If you want to change to a new combination, repeat the steps 1 through 5 starting with the dial in
the new combination position.
IMPORTANT - In order to change the combination, the Key Cabinet must be opened. It is important
not to lose the combination ,because without it the Key Cabinet can not be opened without damaging
the unit.
Figure 1 Figure 3Figure 2 Figure 4
TESTING AND REPROGRAMMING COMBINATION LOCK
6
5
7
7
6
8
9
8
0
9
8
0
8
7
9
5
4
6
IMPORTANT - For your convenience, there are 3 pre-drilled mounting holes and hardware included to
mount on a wall for added security. If you have additional questions about mounting the Key Cabinet,
please check with your local home center/hardware retailer or independent contractor.
BEFORE USE