User`s guide

Cable Pinouts (Host End)

‡

RS232, 12V VLink Cable

MX-5S000-E-3

Pin Function

1 Shield Ground

2 RS232 Transmit Output

3 RS232 Receive Input

4 No Connect

5 Power/Signal Ground

6 DSR

7 CTS Input

8 RTS Output

9 Host +12VDC

Figure 30. 9-Pin Female, D-Type

USB

MX-5S235-E-3

Pin Function

1 PC +5V/V_USB

2 D-

3 D+

4 Ground

Figure 31. USB Type A, Non-Locking

Antenna Disconnect

Figure 32. Antenna Disconnect

1. Remove the connector cover on the bottom of the imager base.

2. Release the strain relief.

3. Press the release lock on the antenna connector.

4. Pull the connector free.

‡ MS7580-118-EAS compatible cables. For standard MS7580 cable pinouts refer

to page 44.