User`s guide

3. Scan the desired EAS timeout length (applicable for regular mode only).

The EAS timeout length specifies the maximum time that the area imager

will leave the EAS interlock signal asserted following a successful scan. The

EAS timeout setting has no effect in continuous mode.

Note: If the area imager routinely fails to deactivate EAS tags, increase the

value of the timeout setting.

EAS Timeout 100 ms

³846000

EAS Timeout 500 ms

³846050

EAS Timeout 1s

³8460100

EAS Timeout 5s

³8460500

To Disable EAS Support

Scan the bar code below to disable EAS support.

Disable EAS Support

³337200