Safe Manual

5
SECURE LOCKOUT PERIOD
If the wrong user code is entered into the keypad 3 consecutive times in a row, the keypad will
automatically revert to the lockout mode and you will not be able to open the safe using the digital
keypad for 20 seconds. If three additional wrong user codes are entered, you will not be able to open
the safe using the digital keypad for 5 minutes. During the lockout period entry can be made using the
override access key.
LOST OR FORGOTTEN USER CODES
LOSS OF BOTH PRIMARY AND SECONDARY USER CODES
If both the Primary user code and Secondary user codes are lost, you may open the safe using
the Override Access key and use the red user code reset button to reprogram the 3-8 digit primary
user code or secondary user code.
The instructions for opening the safe with the override access key are located on page 2.
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to ensure
optimum performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris
or liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,
window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use
abrasive cleansers on the safe or digital keypad.
MOISTURE – We recommend that you place delicate items such as pictures or intricate jewelry into an
air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity.
For optimum performance, the safe should be opened and aired out for at least 20 minutes every two
weeks.
For future reference, store this Operation and Installation Guide in a secure area away from the safe.
DO NOT DISCARD!