50193-03 Fan Manual

Finial
Finial Cap
Nut
Rubber
Washer
29. The pull chain extensions or custom pull chains
extensions (included) may be attached to fan and
light pull chains (Fig. 29).
Fig. 28
Fig. 29
Light
Pull Chain
Fan
Pull Chain
Light Pull Chain Fan Pull Chain
LIGHT KIT INSTALLATION
28. Feed pull chain through the center hole in the
glass globe, rubber washer and nut. Lift the glass
globe and rubber washer over the threaded rod.
Screw the nut onto the threaded rod to temporarily
hold the glass globe in place. Feed the pull chains
through both holes in the nial cap and the center
hole in the nial and lift the nial cap up until it is
ush with the glass globe. Screw the nial onto the
threaded rod to hole the light kit in place. (Fig. 28).
1616