50193-03 Fan Manual

Nut
Rubber
Washer
Finial Cap
Finial
15
LIGHT KIT INSTALLATION
Fig. 27
Fig. 25
Fig. 26
Screw
and
Washer
27. Remove the preinstalled rubber washer, nut, nial
cap, and nial from the light kit (Fig. 27).
26. Install each bulb (Fig. 26).
Important: When replacing the bulb, allow bulb and
light kit to cool before touching.
25. Align holes in the switch housing cap with holes
in upper switch housing. Re-insert screws and
washers that were previously removed. Use a
Phillips screwdriver (not included) to secure all
screws (Fig. 25).
Socket
Screw
Washer