50193-03 Fan Manual
Closemount
Screws
Spring
Washer
Fig. 14
10
CLOSEMOUNT INSTRUCTIONS
15. Raise the fan and place the canopy on the
mounting bracket hook for wiring (Fig. 15).
Canopy
Canopy
Hook
Canopy
Cover
Fig. 13
Fig. 15
13. Remove the canopy cover from the bottom of the
canopy (Fig. 13).
Helpful Hint: The downrod, hanging ball, and canopy
cover are not used in this type of installation.
Closemount Screw
Spring Washer
14. Align the canopy with the closemount screw holes
in the top of the motor assembly. Secure the
canopy to the top of the motor housing by installing
three closemount screws and spring washers into
the top of the motor housing (Fig. 14).