Safe Manual

SAFE SERIAL NUMBER

Whenever contacting our Consumer Assistance Department, you will need to

provide them with the serial number of your safe.

Your safe’s serial number is on a tag that is

located on the front of the safe in the lower

right corner.

IMPORTANT:

Do Not Remove Safe I.D. Tags!

NOTE: Record your safe’s serial number and combination and store in a secure

location OTHER THAN YOUR SAFE.

SAFETY PRECAUTIONS

The safe door is heavy. Do not open the door with the safe on an uneven or

unstable floor. Hanging on an open door may cause the safe to tip forward when

not secured to a wall or the floor, resulting in serious injury or death to yourself or

others. If you have small children in your home, please make sure you never leave

your safe unsecured. It is possible for small children to climb inside your safe and

become locked in. This could result in serious injury or death’

INSTALL BATTERIES

For your convenience, we have included 4 “AA” Alkaline Batteries that provide the

power for the electronic locking system. These batteries must be installed before

using your safe. The battery compartment is located behind the digital keypad

1. To access the compartment, locate

the tab at the top of the keypad.

2. Place your hand on the keypad tab

and pull forward.

3. With the tab pulled forward, rotate

the keypad counterclockwise to the

left and pull keypad out.

4. Install the 4 “AA” batteries on the

inside of the battery compartment.

Proper installation of the batteries

will cause the keypad to beep twice

and the green LED to light up.

5. Once the batteries are installed,

position the keypad back onto the

mounted bracket and rotate

clockwise to the right to lock in

place.