Safe Manual

11
ANCHORING YOUR SAFE
You may bolt the safe to the floor for added theft protection and to avoid tipping.
This safe was manufactured with bolt down holes
pre-drilled in the floor panel.
To secure your safe to the floor:
1. Locate the pre-drilled holes on the floor panel.
2. Anchor the safe using the mounting hardware
kit, which includes lag screws and anchors.
NOTE: Bolting/unbolting of the unit is at the
consumer’s expense and discretion. LH Licensed
Products is not responsible for any costs incurred.
If you have any questions about mounting the
safe, please check with your local home
center/hardware retailer or independent
contractor.
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In
order to ensure optimum performance of your safe, please follow these simple
precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have
excessive dirt, debris or liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a
mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface.
Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad.
MOISTURE – We recommend that you place delicate items such as pictures or
intricate jewelry into an air-tight container before storing them in your safe. Avoid
placing your safe in areas of high humidity. For optimum performance, the safe
should be opened and aired out for at least 20 minutes every two weeks.
For future reference, store this Operation and Installation Guide in a secure area
away from the safe. DO NOT DISCARD!