Models 3014D, 3018D, 3024D, 3032D, 3114D, 3118D, 3124D & 3132D EXECUTIVE / LONG GUN SAFE WITH PROGRAMMABLE DIGITAL LOCK Read this manual carefully and never store it inside the safe!
Models 3014D, 3018D, 3024D, 3032D, 3114D, 3118D, 3124D & 3132D EXECUTIVE / LONG GUN SAFE PACKAGE CONTENTS 1 – Executive / Long Gun Safe 1 – Operation Manual 2 – Override Access Keys 1 – Removable Gun Rack (3014D, 3018D, 3024D, 3114D, 3118D, 3124D) / (2) 3032D, 3132D 1 – Removable Storage Shelf (3014D, 3114D, 3018D, 3118D) / (3) 3024D, 3124D / (4) 3032D, 3132D 8 – Shelf Support Clips (3014D, 3114D, 3018D, 3118D) / (16) 3024D, 3124D / (20) 3032D, 3132D 1 – Interior Storage Box 2 – Storage-Box Keys 4 – “AA” B
SAFE SERIAL NUMBER Whenever contacting our Consumer Assistance Department, you will need to provide them with the serial number of your safe. Your safe’s serial number is on a tag that is located on the front of the safe in the lower right corner. IMPORTANT: Do Not Remove Safe I.D. Tags! NOTE: Record your safe’s serial number and combination and store in a secure location OTHER THAN YOUR SAFE. SAFETY PRECAUTIONS The safe door is heavy. Do not open the door with the safe on an uneven or unstable floor.
UNLOCK & OPEN YOUR NEW SAFE DOOR HANDLE The handle spindles have been shipped inside the Styrofoam cover on the outside of the safe door and should be installed before opening safe the first time. UNLOCK AND OPEN THE SAFE 1. Always make sure that the spindle handle is turned counterclockwise to the left before entering code. 2. Enter the preset factory code “1 2 3 4 5 6” followed by # key into the keypad. 3.
PRIMARY & SECONDARY USER CODES (Cont.) TEST THE PRIMARY USER CODE 1. With door open, rotate handle counterclockwise to put door bolts in lock position. 2. Enter the new 3-8 digit Primary user code followed by the # key. The green LED will light up and the keypad will beep. 3. Rotate the spindle handle clockwise within 5 seconds. 4. The lock bolts should recede into the unlocked position when the handle is turned.
SECONDARY USER CODE PROGRAM THE SECONDARY USER CODE Once you have successfully programmed the Primary user code, you can proceed to programming the Secondary user code. The Secondary user code is programmed using the Digital Keypad and it is not necessary to open the safe to proceed. 1. Using the keypad, press the Ü button twice (Ü-Ü) 2. Enter the factory default user code 1-2-3-4-5-6 followed by the # key into the keypad. 3. The green LED with light up once and the keypad will beep twice. 4.
OPENING/CLOSING SAFE WITH USER CODES 1. Make sure the spindle handle is positioned to the left and enter your new user code into the keypad followed by the # key. 2. The keypad will beep once, green LED will light up and the lock will click. Turn the handle clockwise to the right to open the safe. 3. To lock, close the door and turn the spindle handle counterclockwise to the left.
OVERRIDE ACCESS KEY Your safe is equipped with an emergency override access key lock, which allows immediate access in case you forget your User codes or the batteries need replacing. 1. To access the compartment, locate 1. 2. the tab at the top of the keypad. 2. Place your hand on the keypad tab and pull forward. 3. With the tab pulled forward, rotate the keypad counterclockwise to the left and pull keypad out. 4.
CLIMATE MONITORING TEMPERATURE AND HUMIDITY GAUGE For your convenience and added protection of your safe’s contents, this safe is equipped with a hygrometer that continually monitors and displays the interior temperature and humidity on an LED Display panel located above the left side of the door. Depending on the geographic location of your safe, excess humidity may be a problem that can cause damage to the contents.
REPLACING BATTERIES IN LOCK NOTE: The user code will not be erased if the batteries become weak or are removed. Dead or weak batteries should always be removed promptly. If your batteries are dead and you cannot open the safe by using the digital keypad, you must use the override access key (see below) to open safe and access the battery compartment. 1. To access the compartment, locate the tab at the top of the keypad. 1. 2. 3. 4. 2. Place your hand on the keypad tab and pull forward. 3.
APPROPRIATE USE This Executive Safe protects records and many other valuables. Testing shows that the interior temperature of the safe remains below 350°F (177°C) for 30 minutes during a fire up to 1400°F (593°C) when used properly. Your safe must be closed and latched in order to properly protect the contents from fire. PLACEMENT OF SAFE Proper installation and anchoring are critical to the security of your safe. Install near a load-bearing wall to support the weight of the safe.
ANCHORING YOUR SAFE You may bolt the safe to the floor for added theft protection and to avoid tipping. This safe was manufactured with bolt down holes pre-drilled in the floor panel. To secure your safe to the floor: 1. Locate the pre-drilled holes on the floor panel. 2. Anchor the safe using the mounting hardware kit, which includes lag screws and anchors. NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed Products is not responsible for any costs incurred.
INSTALLING SHELVES Note: Quantity of included shelves and gun racks will vary depending on the model If this safe includes an adjustable / removable shelf and / or gun rack. To install: 1. Remove shelf, gun rack and shelf support clips from protective wrapping. 2. Determine the desired location of your shelf and/or gun rack and note the corresponding support guide slots on the vertical standards that are best suited to support the shelf in that location. 3.
LIMITED WARRANTY LH Licensed Products, Inc., (“LHLP, Inc.”) warrants that for a period of seven (7) years from the date of purchase, this product will be free from structural or mechanical defects resulting from materials or workmanship. LHLP, Inc., at its sole option and as the purchaser’s sole remedy under this warranty, will repair or replace this product or any component of the product found to be defective during the warranty period.
CONSUMER ASSISTANCE EMAIL (Best Contact LHLPCustomerService@LHLPinc.com Method): WEBSITE: www.honeywellsafes.com ADDRESS: Consumer Assistance Dept. LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 USA TELEPHONE: US/Canada 1-877-354-5457 (Toll Free) Mexico 01-800-288-2872 After English voice recording stops you must then enter 800-860-1677 to complete your call.
