Datasheet

12 sensing.honeywell.com
MICRO SWITCH™ Specialty Large Basic Switches BS | DT | MN | MT | TB Series
Table 21. Auxiliary Actuator Order Guide
Catalog
Listing
Description
For
Use
With
Overtravel min.
mm [in]
Operating Position*
mm [in]
Free Position
mm [in]
JR
Roller lever for “S”
plunger type DT switch-
es only. Permits cam
operation
DT 11,1 mm [0.437 in]
44,45 mm ±3,18 mm
[1.75 in ±0.125 in]
–
ADD3721R
Adjustable roller lever.
Tang on top of actuator
can be bent to adjust
O.P. and F.P.
DT, MT
9,53 mm [0.375 in]
approx.
39,6 mm
[1.562 in] approx.
46,03 mm
[1.812 in]
MCD2711
Straight plunger. Panel
mount
DT, MT 3,58 mm [0.141 in] 27,79 mm [1.094 in]
30,18 mm
[1.188 in]
MCD2711H
Sealed straight plunger.
Panel mount. Elastomer
boot seal keeps out
liquid splash and dirt.
Furnished unassem-
bled.
DT, MT 3,58 mm [0.141 in] 27,79 mm [1.094 in]
30,18 mm
[1.188 in]
MD3211Q
Roller plunger. Panel
mount. Roller parallel to
long axis of the switch
DT, MT 3,18 mm [0.125 in] 35,7 mm [1.406 in]
37,69 mm
[1.484 in]
MD3211Q1
Cross roller plunger.
Panel mount. Roller
perpendicular to long
axis of the switch
DT, MT 3,18 mm [0.125 in] 35,7 mm [1.406 in]
37,69 mm
[1.484 in]
MCD7711
High overtravel plunger.
Panel mount
DT, MT
18,26 mm
[0.719 in]
69,1 mm [2.719 in]
71,42 mm
[2.812 in]
* Except where stated ±1,14 mm [±0.045 in]
NOTE: All actuators are for use with pin plunger types only, except catalog listing JR.