User Manual

46 Xenon XP User Guide
When the scanner is out of the base, the page button works normally. Default =
Temporary Streaming Presentation Mode On.
To remove Temporary Streaming Presentation Mode, scan the bar code for * Page
Mode On on page 54.
Temporary Streaming Presentation Timeout
Set a timeout for the length of time the illumination remains on and searching for
bar codes when using Temporary Streaming Presentation Mode. Set the length for
the timeout by scanning one of the bar codes below. Default = 10,000 ms (10 sec-
onds).
Presentation Mode in the Base
Charge Information
The battery or charge pack is designed to charge while the scanner is positioned in
the cordless base unit. Refer to Scanner Communication and Scanning,page 49,
for an interpretation of the Charge Status indicators. Refer to Charge Only Mode
(page 56) if you need to charge a scanner without linking it to the base.
* Temporary Streaming Presentation Mode
On
*10 Second Timeout
60 Second Timeout
* Disabled
Enabled