User Manual

Xenon XP User Guide 237
EZConfig-Scanning Introduction
EZConfig-Scanning provides a wide range of PC-based programming functions
that can be performed on the scanner connected to your PC. EZConfig-Scanning
allows you to download upgrades to the scanner’s firmware, change programmed
parameters, and create and print programming bar codes. Using EZConfig-Scan-
ning, you can even save/open the programming parameters. This saved file can be
e-mailed or, if required, you can create a single bar code that contains all the cus-
tomized programming parameters and mail or fax that bar code to any location.
Users in other locations can scan the bar code to load in the customized program-
ming.
Configure with EZConfig for Scanning
Use the EZConfig for Scanning tool to configure your scanner online:
1. Access the Honeywell Technical Support Downloads Portal at https://
hsmftp.honeywell.com.
2. Go to Software > Barcode Scanners > Software > Tools and Utilitites >
EZConfig for Scanning > Current.
3. Download the Setup version of EZConfig for Scanning.
4. Open EZConfig to configure your scanner.