User Manual

Xenon XP User Guide 3
3. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a bar code from the
Sample Symbols, beginning on page 307.
The unit defaults to a USB PC Keyboard. Refer to page 18 for other USB terminal
settings.
For additional USB programming and technical information, refer to “USB Applica-
tion Note,” available at www.honeywellaidc.com.
Connect with Keyboard Wedge
A scanner or cordless base can be connected between the keyboard and PC as a
“keyboard wedge,” where the scanner provides data output that is similar to key-
board entries. The following is an example of a keyboard wedge connection:
CCB-H-010BT/CCB-H-010BT-BF Base USB Connection: