User Manual

164 Xenon XP User Guide

Straight 2 of 5 IATA (two-bar start/stop)

Straight 2 of 5 IATA On/Off

Straight 2 of 5 IATA Redundancy

If you are encountering errors when reading Straight 2 of 5 IATA bar codes, you may

want to adjust the redundancy count. Redundancy adjusts the number of times a

bar code is decoded before transmission, which may reduce the number of errors.

Note that the higher the redundancy count, the longer it will take to decode the bar

code. To adjust the redundancy, scan the Straight 2 of 5 IATA Redundancy bar code

below, then scan a redundancy count between 0 and 10 on the Programming

Chart, beginning on page 309. Then scan the Save bar code. Default = 0.

Straight 2 of 5 IATA Message Length

Scan the bar codes below to change the message length. Refer to Message Length

Description (page 152) for additional information. Minimum and Maximum

lengths = 1-48. Minimum Default = 4, Maximum Default = 48.

* Off

Straight 2 of 5 IATA

Redundancy

Minimum Message Length

Maximum Message Length