User Manual

162 Xenon XP User Guide

Code 93 Append

This function allows the scanner to append the data from several Code 93 bar

codes together before transmitting them to the host computer. When this function

is enabled, the scanner stores those Code 93 bar codes that start with a space

(excluding the start and stop symbols), and does not immediately transmit the

data. The scanner stores the data in the order in which the bar codes are read,

deleting the first space from each. The scanner transmits the appended data when

it reads a Code 93 bar code that starts with a character other than a space.

Default = Off.

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data

received does not display with the proper characters, it may be because the bar

code being scanned was created using a code page that is different from the one

the host program is expecting. If this is the case, scan the bar code below, select

the code page with which the bar codes were created (see ISO 2022/ISO 646

Character Replacements on page 302), and scan the value and the Save bar code

from the Programming Chart, beginning on page 309. The data characters should

then appear properly.

* Off

Code 93 Code Page