User manual

Xenon/Granit User Guide 293
UPC-E0 Default All UPC-E
Settings
UPEDFT 208
Off UPEEN00 208
*On UPEEN01 208
UPC-E0 Expand *Off UPEEXP0 208
On UPEEXP1 208
UPC-E0 Addenda Required Required UPEARQ1 209
*Not Required UPEARQ0 209
Addenda Timeout Range (0 - 120) *500 DLYADD##### 209
UPC-E0 Addenda Separator *On UPEADS1 209
Off UPEADS0 209
UPC-E0 Check Digit Off UPECKX0 210
*On UPECKX1 210
UPC-E0 Leading Zero Off UPENSX0 210
*On UPENSX1 210
UPC-E0 Addenda 2 Digit Addenda On UPEAD21 210
*2 Digit Addenda Off UPEAD20 210
5 Digit Addenda On UPEAD51 210
*5 Digit Addenda Off UPEAD50 210
UPC-E1 *Off UPEEN10 211
On UPEEN11 211
EAN/JAN-13 Default All EAN/
JAN Settings
E13DFT 211
Off E13ENA0 211
*On E13ENA1 211
Convert UPC-A to EAN-13 UPC-A Converted to EAN-13 UPAENA0 211
Do not Convert UPC-A UPAENA1 211
EAN/JAN-13 Check Digit Off E13CKX0 212
*On E13CKX1 212
EAN/JAN-13 2 Digit Addenda 2 Digit Addenda On E13AD21 212
*2 Digit Addenda Off E13AD20 212
5 Digit Addenda On E13AD51 212
*5 Digit Addenda Off E13AD50 212
EAN/JAN-13 Addenda Required *Not Required E13ARQ0 212
Required E13ARQ1 212
Addenda Timeout Range (0 - 120) *500 DLYADD##### 213
EAN/JAN-13 Addenda
Separator
Off E13ADS0 213
*On E13ADS1 213
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page