User manual

Xenon/Granit User Guide 289
Primary/Alternate Data Formats Primary Data Format ALTFNM0 183
Data Format 1 ALTFNM1 183
Data Format 2 ALTFNM2 183
Data Format 3 ALTFNM3 183
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 183
Single Scan-Data Format 1 VSAF_1 183
Single Scan-Data Format 2 VSAF_2 183
Single Scan-Data Format 3 VSAF_3 184
Symbologies
All Symbologies All Symbologies Off ALLENA0 186
Codabar Default All Codabar
Settings
CBRDFT 186
Off CBRENA0 186
*On CBRENA1 186
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 187
Transmit CBRSSX1 187
Codabar Check Char. *No Check Char. CBRCK20 187
Validate, But Don’t Transmit CBRCK21 187
Validate, and Transmit CBRCK22 187
Codabar Concatenation *Off CBRCCT0 188
On CBRCCT1 188
Require CBRCCT2 188
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 188
Maximum (2 - 60) *60 CBRMAX## 188
Code 39 Default All Code 39
Settings
C39DFT 189
Off C39ENA0 189
*On C39ENA1 189
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 189
Transmit C39SSX1 189
Code 39 Check Char. *No Check Char. C39CK20 189
Validate, But Don’t
Transmit
C39CK21 189
Validate,
and Transmit
C39CK22 189
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 190
Maximum (0 - 48) *48 C39MAX## 190
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page