User manual

Xenon/Granit User Guide 197

Straight 2 of 5 Industrial Message Length

Scan the bar codes below to change the message length. Refer to Message Length

Description (page 186) for additional information. Minimum and Maximum

lengths = 1-48. Minimum Default = 4, Maximum Default = 48.

Straight 2 of 5 IATA (two-bar start/stop)

Straight 2 of 5 IATA On/Off

Straight 2 of 5 IATA Redundancy

If you are encountering errors when reading Straight 2 of 5 IATA bar codes, you may

want to adjust the redundancy count. Redundancy adjusts the number of times a

bar code is decoded before transmission, which may reduce the number of errors.

Note that the higher the redundancy count, the longer it will take to decode the bar

Minimum Message Length

Maximum Message Length

* Off