User manual

Xenon/Granit User Guide 125
Streaming Presentation™ Mode
When in Streaming Presentation mode, the scanner’s aimer goes out after a short
time, but the scan illumination remains on all the time to continuously search for
bar codes. Two modes are available, Normal and Enhanced. Normal mode offers
good scan speed and the longest working ranges (depth of field). Enhanced mode
will give you the highest possible scan speed but slightly less range than Normal
mode. Enhanced mode is best used when you require a very fast scan speed and
don’t require a long working range.
Note: Granit 1920i, 1980i and 1981i do not support Enhanced Streaming Presentation
Mode.
When using Preferred Symbology (page 5-134), a lower priority symbol must be
centered on the aiming pattern to be read in Streaming Presentation Mode.
Note: If you are using a cordless charge base, it must have an external power supply
plugged into the aux port for Streaming Presentation to work properly.
Streaming Presentation In-Stand
This option is available when using In-Stand Sensor Mode, page 122. You may pro-
gram a specific Streaming Presentation Mode for in-stand scanning, and a Manual
Trigger mode for out-of-stand scanning. To do this, you must first scan the pre-
ferred Streaming Presentation mode (Normal, Enhanced, or Mobile Phone), then
scan the Manual Trigger mode (Normal, Enhanced, or Mobile Phone) you want to
use.
CodeGate On
Out-of-Stand
Streaming Presentation
Mode - Normal
Streaming Presentation
Mode - Enhanced