User manual

Xenon/Granit User Guide 87
Base Charge Status
When charging, the base indicates the progress while the scanner resides in the
base.
* The number of scans was measured with a clearly printed UPC code in good light.
The approximate number of scans varies with changes in label quality, symbology,
and environmental factors.
Base Power Communication Indicator
To display the power indicator on a base, scan the Base Power Communication
Indicator On bar code. To turn off the power indicator, scan the Off bar code.
Default = On.
Reset Scanner
Scanning this bar code reboots the scanner and causes it to relink with the base.
Short blinks in multiple pulses. Occurs while transferring
data to/from the RF module or the host port.
Receiving/sending data
Red LED - Host Communication
Red LED
Communication
Condition
Base Button/LED Charge Level
Approximate Expected
Scans*
Green on 100% 450
Green slow blink 50-99% 200
Green fast blink 30-50% 100
Yellow fast blink 0-30% Charging - do not scan
* Base Power Communication
Indicator On
Base Power Communication
Indicator Off
Reset Scanner