User Guide
Table Of Contents
- Xenon™ 1902/1912
- Quick Start Guide
- Getting Started
- Power Supply Assembly (if included)
- Connecting the Scanner
- USB:
- Keyboard Wedge:
- RS232 Serial Port:
- RS485:
- Reading Techniques
- Standard Product Defaults
- RS485 Interface
- USB Serial
- USB PC Keyboard
- Keyboard Country
- Locked Link
- Override Locked Scanner
- Unlinking the Scanner
- Trigger
- Streaming Presentation™
- Suffix
- Add Code ID Prefix to all Symbologies
- Function Code Transmit
- Data Format Editor Instructions
- Programming Chart
- EZConfig-Scanning
- Technical Assistance
- Limited Warranty
- Patents
- User Documentation
- Disclaimer
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS
terminal using port 9B, scan the appropriate code below to program
the terminal, then power cycle the cash register.
Note: For additional RS485 interface selections, see the User’s
Guide for your product at our website,
www.honeywellaidc.com.
USB Serial
Scan the following code to program the scanner to emulate a regular
RS232-based COM Port. If you are using a Microsoft® Windows®
PC, you will need to download a driver from the Honeywell website
(www.honeywellaidc.com). The driver will use the next available
COM Port number. Apple® Macintosh computers recognize the
scanner as a USB CDC class device and automatically use a class
driver.
Note: No extra configuration (e.g., baud rate) is necessary.
IBM Port 9B HHBCR-1
Interface
IBM Port 9B HHBCR-2
Interface
USB Serial