User's Guide

70 HH1800 User Guide
Move the cursor to the end
EA
Move the cursor to the last character in the input message. Syntax = EA.
Search Commands
Search forward for a character
F8
Search the input message forward for “xx” character from the current cursor position, leaving
the cursor pointing to the “xx” character. Syntax = F8xx where xx stands for the search
character’s hex value for its ASCII code.
Refer to the ASCII Conversion Chart (Code Page 1252), beginning on page 203 for decimal, hex
and character codes.
F8 Example: Send barcode data that starts after a particular character
Search for the letter “D” in barcodes and send all the data that follows, including the “D.”
Using the barcode above:
Command string: F844F10D
F8 is the “Search forward for a character” command
44 is the hex value for “D”
F1 is the “Send all characters” command
0D is the hex value for a CR
The data is output as:
DEFGHIJ
<CR>