User's Guide

126 HH1800 User Guide
output only the data from the GS1 Databar code. See Coupon GS1 DataBar Output (page 104)
for further information.
GS1 Composite Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description
(page 82) for additional information. Minimum and Maximum lengths = 1-2435. Minimum
Default = 1, Maximum Default = 2435.
Minimum Message Length
Maximum Message Length
GS1 Emulation
The scanner can automatically format the output from any GS1 data carrier to emulate what
would be encoded in an equivalent GS1-128 or GS1 DataBar symbol. GS1 data carriers include
UPC-A and UPC-E, EAN-13 and EAN-8, ITF-14, GS1- 128, and GS1 DataBar and GS1
Composites. (Any application that accepts GS1 data can be simplified since it only needs to
recognize one data carrier type.)
If GS1-128 Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13) are expanded
out to 16 digits. If the AIM ID is enabled, the value will be the GS1- 128 AIM ID, ]C1 (see
Symbology Charts on page 200).
If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13) are
expanded out to 16 digits. If the AIM ID is enabled, the value will be the GS1-DataBar AIM ID,
]em (see Symbology Charts on page 200).
If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and UPC- E expansion
is controlled by the UPC-E0 Expand (page 118) setting. If the AIM ID is enabled, the value will
be the GS1-128 AIM ID, ]C1 (see Symbology Charts on page 200).
If EAN8 to EAN13 Conversion is scanned, all EAN8 barcodes are converted to EAN13 format.
Default = GS1 Emulation Off.
GS1-128 Emulation