User's Guide

7 - 6
Full ASCII
If Full ASCII Code 39 decoding is enabled, certain character pairs within the bar code symbol will be interpreted as a single
character. For example: $V will be decoded as the ASCII character SYN, and /C will be decoded as the ASCII character #.
Default = Off.
Character pairs /M and /N decode as a minus sign and period respectively.
Character pairs /P through /Y decode as 0 through 9.
Code 39 Code Page
Code pages define the mapping of character codes to characters. If the data received does not display with the proper
characters, it may be because the bar code being scanned was created using a code page that is different from the one the
host program is expecting. If this is the case, scan the bar code below, select the code page with which the bar codes were
created (see ISO 2022/ISO 646 Character Replacements on page A-7), and scan the value and the Save bar code from
the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly.
NUL %U DLE $P SP SPACE 00@%VPP‘%Wp+P
SOH $A
DC1 $Q !/A 11AA QQa+Aq+Q
STX $B
DC2 $R “/B 22 BBRR b+Br+R
ETX $C
DC3 $S #/C 33 CCSSc+Cs+S
EOT $D
DC4 $T $/D 44DD TTd+Dt+T
ENQ $E
NAK $U %/E 55EE UUe+Eu+U
ACK $F
SYN $V &/F 66 FFVVf+Fv+V
BEL $G
ETB $W ‘/G77GGWW g+Gw+W
BS $H
CAN $X (/H 88HH XXh+Hx+X
HT $I
EM $Y )/I 99IIYY i+Iy+Y
LF $J
SUB $Z */J :/ZJJZZj+Jz+Z
VT $K
ESC %A +/K ;%FKK[%Kk+K{%P
FF $L
FS %B ,/L <%GLL\%Ll+L|%Q
CR $M
GS %C -- =%HMM ]%Mm+M}%R
SO $N
RS %D .. >%INN^%Nn+N~%S
SI $O
US %E //O ?%JOO_%Oo+ODEL %T
Full ASCII On
* Full ASCII Off
Code 39 Code Page
VG1602-UG C Released Honeywell proprietary & Confidential
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Downloaded By: Shen, Scott - 16 June 2022 07:14:56 UTC HEC: EAR99 TEC: EAR99 GOV: ESO1.0