Technical Bulletin

ManualsBrandsHoneywell ManualsActuatorValve-Closed Indication Switch Bag Assembly for V4055

PRODUCT DATA

60-2309-14

V4055A,B,D,E

On-Off Fluid Power Gas Valve Actuator

APPLICATION

The V4055 Gas Valve Actuator, in combination with a

VE5000

, V5055 or V5097 Gas Valve, controls the gas supply

to commercial and industrial burners.

When replacing a V4034 with a V4055, the V5034 gas valve

must also be replaced with a V5055 or V5097 gas valve.

FEATURES

• The V4055 Actuator, when used with the VE5000

, V5097

or V5055 Valve, is rated for final safety shutoff service.

• The V4055 Actuator can be used with the characterized

guide model of the V5055 or V5097 Gas Valve to enhance

lightoff smoothness.

• The standard model has an opening time of 26 seconds at

60 Hz or 32 seconds at 50 Hz. A fast-opening model is

available with timings of 13 seconds at 60 Hz or 16

seconds at 50 Hz.

• Maximum closing time is one second, which meets code,

standard and insurer requirements.

• Models available with damper shaft, with or without spring

return; shaft extends out both sides and rides in Teflon-like

Delrin bushings; used with standard 7616BR Damper

Crank Arm.

• Red OPEN indicator attached to actuator stem shows

when valve is even slightly open; yellow SHUT indicator on

valve stem shows only when gas valve is fully closed.

• Models available with adjustable max flow limit switch.

• Ambient temperature rating is -40°F to +150°F (-40°C to

+66°C) for 60 Hz models and -10°F to +158°F (-23°C to

+70°C) for 50 Hz and 50/60 Hz models.

• Valve and actuator combinations can be mounted in any

position, with the exception of the 220 to 240 Vac, 50/60 Hz

models, which are mounted vertically.

• Models available with factory-installed single pole double

throw (spdt) field-adjustable Auxiliary Switch. Field-addable

Auxiliary Switch kits are also available.

• Standard enclosure meets NEMA 1 (IP30) requirements;

models available with NEMA 4 (IP54) weatherproof

enclosure.

• V4055D and high pressure V4055E with Proof-of-Closure

Switch and V5055/V5097C or E with valve seal overtravel

interlock (double seal) to meet specific code, standard and

insurer requirements.

VE5000 is a European manufactured and approved valve for

European use only.

Contents

Application ........................................................................ 1

Features ........................................................................... 1

Specifications ................................................................... 2

Ordering Information ........................................................ 2

Installation ........................................................................ 4

Wiring ............................................................................... 6

Checkout and Service ...................................................... 7

NOTICE: Per Industry Standards, the actuator is required a

conduit seal or a cable type that is sealed be installed in a

device that can result in a flammable liquid flow through a

conduit or cable to an electrical ignition source in the event of

a seal leakage or diaphragm failure.

Summary of content (8 pages)

PAGE 1
V4055A,B,D,E On-Off Fluid Power Gas Valve Actuator PRODUCT DATA • The standard model has an opening time of 26 seconds at 60 Hz or 32 seconds at 50 Hz. A fast-opening model is available with timings of 13 seconds at 60 Hz or 16 seconds at 50 Hz. • Maximum closing time is one second, which meets code, standard and insurer requirements.
PAGE 2
V4055A,B,D,E ON-OFF FLUID POWER GAS VALVE ACTUATOR SPECIFICATIONS Table 1. Nominal Opening Time (seconds). Models: V4055A Actuator, with V5055, V5097 or VE5000 Gas Valves, provides on-off control of fuel. With proper adapter (see Accessories), it replaces the V4034 Actuator on a V5034 Gas Valve. V4055B Actuator is a high pressure version of V4055A. V4055D Actuator is identical to V4055A, except has a Proof-of-Closure Switch. Used with V5055C/V5097C (double seal) for valve seal overtravel interlock.
PAGE 3
V4055A,B,D,E ON-OFF FLUID POWER GAS VALVE ACTUATOR Table 3. V4055A,D Electrical Ratings. Opening (Standard) Voltage and Frequency Inrush (W) (A) Opening (Fast) VA) Inrush (W) Holding (A) (VA) (W) (A) (VA) 100/50-60a — 43.0 0.91 91 — 58.0 1.30 130 10.4 0.16 16 100/50-60b — 33.0 0.6 67 — 43.0 0.91 91 8.4 0.14 14 120/60 3.9 50.0 0.94 115 5.4 71.0 1.33 160 9.5 0.12 14 a — 68.0 0.79 158 — 88.0 1.10 220 10.6 0.09 18 200/50-60b — 48.0 0.
PAGE 4
V4055A,B,D,E ON-OFF FLUID POWER GAS VALVE ACTUATOR Accessories: 133568 Auxiliary Switch Bag Assembly (not for models with maximum flow limit switch). 133569 Valve-Closed Indication Switch Bag Assembly. NOTE: Check local codes for acceptance of adding the switch and using the valve seal overtravel V5055C or V5055E valves. 7616BR Damper Crank Arm (damper arm and clip). Available Models: V4055 with NEMA 4 enclosure (weatherproof).
PAGE 5
V4055A,B,D,E ON-OFF FLUID POWER GAS VALVE ACTUATOR WARNING Electrical Shock Hazard. Can cause serious injury or death. Disconnect power supply before making wiring connections to prevent electrical shock and equipment damage. 5. 6. mounting the switch in the correct position. Fasten with two screws through the actuator base. (The Proof-of-Closure Switch is not adjustable.) If only one switch is used, install the narrow barrier included with the switch in the unused space.
PAGE 6
V4055A,B,D,E ON-OFF FLUID POWER GAS VALVE ACTUATOR Adjust Auxiliary Switch (If Used) The Auxiliary Switch is adjustable throughout the stroke of the actuator. With the switch installed in the actuator, turn the adjusting screw (see Fig. 2) clockwise to cause the switch to operate earlier in the stroke or counterclockwise to cause the switch to operate later in the stroke. 7616BR DAMPER ARM 52 DEGREE ANGULAR ROTATION 2-5/16 (58.7) MAXIMUM TRAVEL SHAFT L1 HOT 1 2-11/16 (68.3) RADIUS 2 M7322A Fig. 3.
PAGE 7
V4055A,B,D,E ON-OFF FLUID POWER GAS VALVE ACTUATOR Adjust Max Flow Limit Switch (If Used) c. Inspect the inside of the valve. IMPORTANT: If fluid is present on the inside surfaces of the valve body or bonnet surfaces, the bonnet assembly or entire valve must be replaced. See Table 8 below for the bonnet assembly part number. The Max Flow Limit Switch is adjustable throughout the stroke of the actuator.
PAGE 8
V4055A,B,D,E ON-OFF FLUID POWER GAS VALVE ACTUATOR Table 9. Gas Valve Replacement Seals. Table 8. Replacement Bonnets for V5055/V5097 Gas Valves.