User Manual

8 - 17
ISSN Translate *Off E13ISS0 6-41
On E13ISS1 6-41
Reformat On E13ISR1 6-41
*Reformat Off E13ISR0 6-41
EAN/JAN-8 Default All EAN/
JAN 8 Settings
EA8DFT 6-42
Off EA8ENA0 6-42
*On EA8ENA1 6-42
EAN/JAN-8 Check Digit Off EA8CKX0 6-42
*On EA8CKX1 6-42
EAN/JAN-8 Addenda *2 Digit Addenda Off EA8AD20 6-42
2 Digit Addenda On EA8AD21 6-42
*5 Digit Addenda Off EA8AD50 6-42
5 Digit Addenda On EA8AD51 6-42
EAN/JAN-8 Addenda Required *Not Required EA8ARQ0 6-43
Required EA8ARQ1 6-43
EAN/JAN-8 Addenda
Separator
*Off EA8ADS0 6-43
On EA8ADS1 6-43
Addenda Timeout Range (0 - 65535) *100 DLYADD##### 6-43
EAN/JAN-8 Redundancy Redundancy EA8VOT## 6-44
MSI Default All MSI Settings MSIDFT 6-44
*Off MSIENA0 6-44
On MSIENA1 6-44
MSI Check Character *Validate Type 10, but Don’t
Transmit
MSICHK0 6-44
Validate Type 10 and
Transmit
MSICHK1 6-44
Validate 2 Type 10 Chars, but Don’t
Transmit
MSICHK2 6-45
Validate 2 Type 10 Chars and
Transmit
MSICHK3 6-45
Validate Type 11 then Type 10
Char, but Don’t Transmit
MSICHK4 6-45
Validate Type 11 then Type 10
Char and Transmit
MSICHK5 6-45
Disable MSI Check Characters MSICHK6 6-45
MSI Redundancy Redundancy MSIVOT## 6-45
MSI Message Length Minimum (1 - 80) *3 MSIMIN## 6-45
Maximum (1 - 80) *80 MSIMAX## 6-45
Plessey Code Default All
Plessey Code Settings
PLSDFT 6-46
Off PLSENA0 6-46
*On PLSENA1 6-46
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page