User Manual

8 - 10
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 5-13
Single Scan-Data Format 1 VSAF_1 5-13
Single Scan-Data Format 2 VSAF_2 5-13
Single Scan-Data Format 3 VSAF_3 5-13
Symbologies
All Symbologies All Symbologies Off ALLENA0 6-1
All Symbologies On ALLENA1 6-1
Codabar Default All Codabar
Settings
CBRDFT 6-2
Off CBRENA0 6-2
*On CBRENA1 6-2
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 6-2
Transmit CBRSSX1 6-2
Codabar Check Char. *No Check Char. CBRCK20 6-2
Validate Modulo 16, But Don’t
Transmit
CBRCK21 6-2
Validate Modulo 16 and Transmit CBRCK22 6-3
Validate Modulo 7 CD, But Don’t
Transmit
CBRCK23 6-3
Validate Modulo 7 CD and
Transmit
CBRCK24 6-3
Validate CLSI, But Don’t Transmit CBRCK25 6-3
Validate CLSI and Transmit CBRCK26 6-3
Codabar Concatenation *Off CBRCCT0 6-3
On CBRCCT1 6-3
Require CBRCCT2 6-3
Concatenation Timeout DLYCCT 6-4
Codabar Redundancy Redundancy CBRVOT## 6-4
Codabar Message Length Minimum (1 - 80) *3 CBRMIN## 6-4
Maximum (1 - 80) *80 CBRMAX## 6-4
Code 39 Default All Code 39
Settings
C39DFT 6-5
Off C39ENA0 6-5
*On C39ENA1 6-5
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 6-5
Transmit C39SSX1 6-5
Code 39 Check Char. *No Check Char. C39CK20 6-5
Validate, But Don’t
Transmit
C39CK21 6-5
Validate,
and Transmit
C39CK22 6-5
Code 39 Redundancy Redundancy C39VOT## 6-6
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page