User Manual

8 - 7
Aimer Delay 200 milliseconds SCNDLY200 3-7
400 milliseconds SCNDLY400 3-7
*Off (no delay) SCNDLY0 3-7
User-Specified Aimer Delay Range 0 - 4,000 ms SCNDLY#### 3-7
LED Indicators Red LED Off LEDFN10 3-8
Green LED Off LEDFN20 3-8
Red LED On with Good Scan LEDFN11 3-8
*Green LED On with Good Scan LEDFN21 3-8
*Red LED On with Laser LEDFN12 3-8
Green LED On with Laser LEDFN22 3-8
Red LED On when CodeGate
Disabled
LEDFN14 3-8
Green LED On when CodeGate
Disabled
LEDFN24 3-8
Red LED On with CTS LEDFN1128 3-8
Green LED On with CTS LEDFN2128 3-8
Good Read Delay *No Delay DLYGRD0 3-9
Short Delay (500 ms) DLYGRD500 3-9
Medium Delay (1000 ms) DLYGRD1000 3-9
Long Delay (1500 ms) DLYGRD1500 3-9
User-Specified Good Read Delay Range 0 - 30,000 ms DLYGRD##### 3-9
Out-of-Stand Settings Out-of-Stand Defaults AOSDFT 3-9
Presentation Mode Out-of-Stand PAPPM3 3-10
Manual Activation Mode Off Out-
of-Stand
AOSMEN0 3-10
*Manual Activation Mode On Out-
of-Stand
AOSMEN1 3-10
Do Not End Manual Activation
After Good Read Out-of-Stand
AOSMGD0 3-10
*End Manual Activation After Good
Read Out-of-Stand
AOSMGD1 3-10
Laser Timeout - Trigger Hold Out-
of-Stand
(Range 1 - 65525) *30,000 ms
AOSMPT##### 3-11
Laser Timeout - Trigger Release
Out-of-Stand
(Range 1 - 65525) *0 ms
AOSMRT##### 3-11
Reread Delay Short (500 ms) DLYRRD500 3-11
*Medium (750 ms) DLYRRD750 3-11
Long (1000 ms) DLYRRD1000 3-11
Extra Long (2000 ms) DLYRRD2000 3-11
User-Specified Reread Delay Range 0 - 30,000 ms DLYRRD##### 3-11
CodeGate CodeGate Off Out-of-Stand AOSCGD0. 3-12
*CodeGate On Out-of-Stand AOSCGD1. 3-12
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page