User manual

50 Voyager 1250g User Guide
CodeGate
®
When CodeGate is On, the trigger is used to allow decoded data to be transmitted
to the host system. The scanner remains on, scanning and decoding bar codes, but
the bar code data is not transmitted until the trigger is pressed. When CodeGate is
Off, bar code data is transmitted when it is decoded. Default = CodeGate Off in-
Stand, CodeGate On Out-of-Stand.
Object Detection Mode
Object Detection Mode uses an LED to detect when an object is in the scanner’s
field of view. When an object is detected, the laser turns on and the scanner
attempts to scan the bar code. Default = Object Detection Mode On In-Stand.
* CodeGate Off
In-Stand
CodeGate On
In-Stand
CodeGate Off
Out-of-Stand
* CodeGate On
Out-of-Stand
Object Detection Mode Off
In-Stand
* Object Detection Mode On
In-Stand
* Object Detection Mode Off
Out-of-Stand