User manual

48 Voyager 1250g User Guide
Manual Activation Mode
In Manual Activation Mode, you must pull the trigger to scan a bar code. The scan-
ner scans until a bar code is read, or until the trigger is released. Default = Manual
Activation Mode Off In-Stand, Manual Activation On Out-of-Stand.
End Manual Activation After Good Read
After a bar code is successfully read, the laser can be programmed either to remain
on and scanning, or to turn off. When End Manual Activation After Good Read is
enabled, the laser turns off and stops scanning after a good read. If you scan Do
Not End Manual Activation After Good Read, the laser remains on after a good
read, but the trigger must be pressed to scan the next bar code. Default = End Man-
ual Activation After Good Read.
Presentation Mode with
CodeGate Out-of-Stand
Manual Activation Mode Off
In-Stand
* Manual Activation Mode On
In-Stand
Manual Activation Mode Off
Out-of-Stand
* Manual Activation Mode On
Out-of-Stand
Do Not End Manual Activation
After Good Read In-Stand
* End Manual Activation After
Good Read In-Stand