User manual

36 Voyager 1250g User Guide
RS232 Defaults
If you want the custom RS232 default settings restored to your scanner, scan the
RS232 Defaults bar code below. This resets the scanner to the custom default set-
tings (see Set Custom Defaults on page 5). If there are no custom defaults, it will
reset the scanner to the factory default settings. Any settings that have not been
specified through the custom defaults will be restored to the factory default set-
tings.
NCR Modifiers
NCR ACK/NAK
This is an NCR communication protocol for ACK/NAK processing. Default = NCR
ACK/NAK Off.
Block Check Character
When this selection is set to Transmit, the NCR Block Check Character (BCC) is
expected with incoming messages and transmitted with outgoing messages.
Default = Transmit.
* BEL/CAN Off
RS232 Defaults
* NCR ACK/NAK Off
NCR ACK/NAK On
* Transmit