User manual

Voyager 1250g User Guide 17

Wincor Nixdorf Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf

terminal. This bar code sets the baud rate to 9600 bps and the data format to 8

data bits, no parity, 1 stop bit.

Note: If you are having unexpected results with this programming code, scan the Activate

Defaults bar code on page 149 first, then scan the programming bar code above.

Wincor Nixdorf Beetle™ Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf

Beetle terminal. The following prefixes are programmed for each symbology:

Note: If you are having unexpected results with this programming code, scan the Activate

Defaults bar code on page 149 first, then scan the programming bar code above.

Wincor Nixdorf Terminal Settings

Symbology Prefix Symbology Prefix

Aztec Code V Interleaved 2 of 5 I

Codabar N MaxiCode T

Code 93 L MicroPDF417 S

Code 128 K PDF417 Q

Data Matrix R QR Code U

EAN-8 B Straight 2 of 5 IATA H

EAN-13 A UPC-A A0

GS1 DataBar E UPC-E C

GS1-128 P All other bar codes M

Wincor Nixdorf Beetle Settings