User manual

168 Voyager 1250g User Guide
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 85
Single Scan-Data Format 1 VSAF_1 85
Single Scan-Data Format 2 VSAF_2 85
Single Scan-Data Format 3 VSAF_3 85
Symbologies
All Symbologies All Symbologies Off ALLENA0 88
Codabar Default All Codabar
Settings
CBRDFT 88
Off CBRENA0 89
*On CBRENA1 88
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 89
Transmit CBRSSX1 89
Codabar Check Char. *No Check Char. CBRCK20 89
Validate Modulo 16, But Don’t
Transmit
CBRCK21 89
Validate Modulo 16, and Transmit CBRCK22 89
Validate Modulo 7 CD, But Don’t
Transmit
CBRCK23 90
Validate Modulo 7 CD, and
Transmit
CBRCK24 90
Validate CLSI, But Don’t Transmit CBRCK25 90
Validate CLSI, and Transmit CBRCK26 90
Codabar Concatenation *Off CBRCCT0 90
On CBRCCT1 90
Require CBRCCT2 90
Concatenation Timeout DLYCCT 91
Codabar Redundancy Range (0 - 10) *0 CBRVOT## 91
Codabar Message Length Minimum (1 - 80) *3 CBRMIN## 91
Maximum (1 - 80) *80 CBRMAX## 91
Code 39 Default All Code 39
Settings
C39DFT 92
Off C39ENA0 92
*On C39ENA1 92
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 92
Transmit C39SSX1 92
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page